STABILA 15237 - Level 183 cm with handles, extreme resistance, Type 196-2

Characteristics:

• STABILA Type 196-2 manufactured in the range of 60-183 cm
• Extra thick rectangular profile of light metal with gripping ridges and a new type of removable end caps

  from two materials and two additional openings for improved gripping of the two components.

• Removable end caps are also equipped with proven patented anti-slip stops.
• With two vertical vials and 1 horizontal vial.
• Accuracy in the normal position: 0.029 ° = 0.5 mm/m
• Accuracy overhead measurements: 0.029 ° = 0.5 mm/m.

Libela:

• vial block is made of high quality acrylic glass safely sealed inserted anticorrosion rings for reading.
• high resistance rupture.
• can be measured in the inverted position highlights this symbol at water level.
• te nto kind of measurement is not suitable, each vial.
• The vial is special fluorescent liquid that has a high resistance to UV rays.
• Old is not only to make an easily readable bubble, but also that they do not move too quickly or too slowly.
• for a good reading is important as the size of the bubble.
• precise reading is possible at temperatures from -20°C to +40 C.
• electrostatic charge: Influence vial's operation and thus the accuracy of electrostatic discharge spirit levels STABILA excluded.
• holder vial block is a high-quality plastic connecting vial block and the profile of a spirit level.
• One of the most accurate methods, the system for attaching the vial, patented STABILA.
• After injection shrinkage with synthetic resins produce a permanent and undetachable connections free from internal stresses.
• setting holder is made before the resin hardens, thereby guaranteeing consistently high accuracy.

Profile glass:

• profile constitutes an extension of the vial and therefore must be of a durable material without deforming stress.
• This material combines great practicality, low weight and good handling.
• STABILA goes one step further.
• by using the spirit level are chosen different cross sections and wall thicknesses.
• Another important point is the profile for gripping the vial block.
• it is possible to note that on the one hand, the strength profile as little as possible is reduced on the other hand, that if possible good visibility of the vial.
• U STABILA spirit levels angle horizontal vial 300 °.
• edge routing is only the tool into the length of 120 cm

Plastic pipes:

• To measurement surface securely protect the end caps from a solid plastic firmly and permanently embedded.
• To be achieved eno good shock-absorption must be adequately dimensioned exceeding the height of the level's hollow profile.
• STABILA also provides end caps with practical additional functions.