STABILA 15853 - Level 61 cm magnetic, extreme resistance, Type M-96-2

Characteristics:

• STABILA Type 96-2-M are produced in the range of 40 to 200 cm
• With two milled measuring surfaces you can use the 96-2-M in any position. "M" means magnets.
• ASIC extra strong rare earth magnets. 96-2-M therefore clings to steel like stuck and overhead measurements.
• 2 or 4 system rare earth magnet depending on the length.
• Extra thick rectangular profile of light metal with gripping ridges and a new type of removable end caps made from two materials.
• Removable end caps are also equipped with proven patented anti-slip stops.
• with two vertical vials and 1 horizontal vial.
• Accuracy in the normal position: 0.029 ° = 0.5 mm/m
• Accuracy overhead measurements: 0.043 ° = 0.75 mm/m.

the spirit level:

• vial block is made of high quality acrylic glass safely sealed inserted anticorrosion rings for reading.
• High resistance to breakage.
• can be measured in the inverted position highlights this symbol at water level.
• for this kind of measurement is not appropriate any vial.
• the vial is special f non-fluorescent fluid that exhibits high resistance to UV light.
• Old includes not only the bubble to be easily readable, but also that they do not move too quickly or too slowly.
• for a good reading is important as the size of the bubble.
• precise reading is possible at temperatures from -20°C to +40°C.
• Electrostatic charge: Influence vial's operation and therefore accuracy electrostatic discharge spirit levels STABILA excluded.
• holder vial block is a high-quality plastic connecting vial block and the profile of a spirit level.
• One of the most accurate methods, the system for attaching the vial, patented STABILA .
• After injection shrinkage with synthetic resins produce a permanent and undetachable connections free from internal stresses.
• Settings holder is performed before the resin hardens, thus ensuring constantly high accuracy.

Profile glass:

• Profile provides p rodloužení vial and must therefore be a lasting and stable material supply.
• This material combines great practicality, low weight and very good handling.
• STABILA goes one step further.
• By using the spirit level are chosen different cross sections and wall thicknesses.
• Another important point is the profile for gripping the vial block.
• it is possible to note that on the one hand the strength of the profile, as little as possible is reduced on the other hand, that if possible, good visibility of the vial.
• U STABILA spirit levels angle horizontal vial 300 °.

  Plastic pipes:

  • To measurement surface securely protect the end caps from a solid plastic matter firmly and permanently embedded.
  • to achieve good shock-absorption must be adequately dimensioned exceeding the height of the level's hollow profile
  • STABILA also provides con Cove caps with practical additional functions.