STABILA 16670 - Level 25 cm magnetic, extreme durability, torpedo Type 81 SV REM W360

Characteristics:

• STABILA Type 81 SV REM W360 a length of 25 cm
• milled measuring surface with a V groove and rare earth magnets: for a particularly strong adhesion to pipes and other steel elements.
• gradient bubble vial for 1% and 2%. Stable vial with a 45 ° angle for direct checking of struts and pipes at 45 °.
• Especially strong aluminum profile die-cast for maximum stress.
• In this spirit level expected many locksmiths, builders steel structures, builders pipes, scaffolding and installers.
• 1 vertical and one horizontal vial, 1 vial which can be rotated by 360 °
• one rare earth magnet.
• Accuracy in the normal position: 0.029 ° = 0.5 mm/m
• Accuracy overhead 0.043 ° = 0.75 mm/m.

the spirit level:

• vial block is made of high quality acrylic glass safely sealed inserted anticorrosion rings for reading.
• High resistance to breakage.
• can be measured in the inverted position highlights this symbol at water level.
• for this kind of measurement is not suitable, each vial.
• the vial is special fluorescent liquid which exhibits a high resistance p roti UV rays.
• Old is not only to make an easily readable bubble, but also that they do not move too quickly or too slowly.
• For a good reading is also important bubble size.
• precise reading is possible at temperatures from -20°C to +40°C.
• electrostatic charge: Influence vial's operation and thus the accuracy of electrostatic discharge spirit levels STABILA excluded.
• holder vial block is a high-quality plastic connecting the vial block and the spirit level's profile.
• One of the most accurate methods, the system is fit vials, patented by STABILA.
• After injection shrinkage with synthetic resins produce a permanent and undetachable connections free from internal stresses.
• Settings holder is performed before the resin hardens, thus ensuring constantly high accuracy.

Profile glass:

• profile constitutes an extension of the vial and therefore must be durable mater lu without deforming tension.
• This material combines great practicality, low weight and very good handling.
• STABILA goes one step further.
• By using a spirit level are chosen various cross sections and wall thicknesses.
• Another important point is the profile for gripping the vial block.
• it is possible to note that on the one hand, the strength profile as little as possible reduced and, on the other hand, is ensured, as well as possible the visibility of the vial.
• U STABILA spirit levels angle horizontal vial 300 °.

Plastic pipes:

• To measurement surface securely protect the end caps from a solid plastic firmly and permanently embedded.
• to achieve good shock-absorption must be adequately dimensioned exceeding the height of the level's hollow profile.
• STABILA also provides end caps with practical additional functions.